The E-Z Start Kit™ contains all the chemicals needed to prepare and balance your spa water for simple once-a-week maintenance featuring :

• E-Z SpaOM™ multi-tasking compound.
  
• E-Z Start Kit™ includes 1 lb.
• E-Z SpaOM™,
• 8 oz. EZ Pre-Start™,
• 1 lb. EZ Boost™,
• 1 lb. EZ Up™,
• 1 ½ lb. E-Z Down™,
• 1 lb. EZ Cal™, test strips and 1 oz. measuring scoop.

We also carry the full line of E-Z Spa product for all your spa needs.

SPA TIPS:

Always add your chemicals through the filter compartment.

Initial Fill:

• Add one bottle of Metal-Gon for iron
• Add 2 to 3 oz. Of chlorinating granules or MPS
  
• Run jet cycle for 10 minutes

Test W/ 5 way test strip

Balance pH/alkalinity:

• Add 2oz. Ph down or Ph up every 4 hours if needed
• These levels could take 3-7 days to come inline
  Note: pH and alkalinity follow each other
  Only use E-Z Spa after PH/Alkalinity are in the ideal range of the test strip.

Weekly:

• Test
  
• Turn jets on to add chemicals.
  
• Adjust chemicals according to test strip.
  
• Add 1 oz. Of E-Z Spa for every 100 gallons.
  
• Note: Use 1/2 less E-Z Spa if you have ozone or Mineral purifier.

Bi-weekly:

• Clean and rotate filters

Every 6 Months

• Drain and refill spa
  
• Your back to the Initial Fill

Test Strip Information:

• Total Chlorine 1-3 PPM
  
• Alkalinity 80-120 PPM
• pH 7.2 - 7.6
  
• Calcium Hardness 250-450

If you have questions please call us at: 317-869-0549